mirror of https://github.com/espruino/BangleApps
53 lines
2.7 KiB
Markdown
53 lines
2.7 KiB
Markdown
# Active Pedometer
|
|
Pedometer that filters out arm movement and displays a step goal progress.
|
|
|
|
I changed the step counting algorithm completely.
|
|
Now every step is counted when in status 'active', if the time difference between two steps is not too short or too long.
|
|
To get in 'active' mode, you have to reach the step threshold before the active timer runs out.
|
|
When you reach the step threshold, the steps needed to reach the threshold are counted as well.
|
|
|
|
## Screenshots
|
|
* 600 steps
|
|
|
|
|
|
* 1600 steps
|
|
|
|
|
|
* 10600 steps
|
|
|
|
|
|
## Features
|
|
|
|
* Two line display
|
|
* Can display distance (in km) or steps in each line
|
|
* Large number for good readability
|
|
* Small number with the exact steps counted or more exact distance
|
|
* Large number is displayed in green when status is 'active'
|
|
* Progress bar for step goal
|
|
* Counts steps only if they are reached in a certain time
|
|
* Filters out steps where time between two steps is too long or too short
|
|
* Step detection sensitivity from firmware can be configured
|
|
* Steps are saved to a file and read-in at start (to not lose step progress)
|
|
* Settings can be changed in Settings - App/widget settings - Active Pedometer
|
|
|
|
## Settings
|
|
|
|
* Max time (ms): Maximum time between two steps in milliseconds, steps will not be counted if exceeded. Standard: 1100
|
|
* Min time (ms): Minimum time between two steps in milliseconds, steps will not be counted if fallen below. Standard: 240
|
|
* Step threshold: How many steps are needed to reach 'active' mode. If you do not reach the threshold in the 'Active Reset' time, the steps are not counted. Standard: 30
|
|
* Act.Res. (ms): Active Reset. After how many miliseconds will the 'active mode' reset. You have to reach the step threshold in this time, otherwise the steps are not counted. Standard: 30000
|
|
* Step sens.: Step Sensitivity. How sensitive should the sted detection be? This changes sensitivity in step detection in the firmware. Standard in firmware: 80
|
|
* Step goal: This is your daily step goal. Standard: 10000
|
|
* Step length: Length of one step in cm. Standard: 75
|
|
* Line One: What to display in line one, steps or distance. Standard: steps
|
|
* Line Two: What to display in line two, steps or distance. Standard: distance
|
|
|
|
## Releases
|
|
|
|
* Offifical app loader: https://github.com/espruino/BangleApps/tree/master/apps/activepedom (https://banglejs.com/apps)
|
|
* Forked app loader: https://github.com/Purple-Tentacle/BangleApps/tree/master/apps/activepedom (https://purple-tentacle.github.io/BangleApps/#widget)
|
|
* Development: https://github.com/Purple-Tentacle/BangleAppsDev/tree/master/apps/pedometer
|
|
|
|
## Requests
|
|
|
|
If you have any feature requests, please post in this forum thread: http://forum.espruino.com/conversations/345754/ |