mirror of https://github.com/espruino/BangleApps
39 lines
1.7 KiB
Markdown
39 lines
1.7 KiB
Markdown
# Summary
|
|
Workout heart rate monitor that buzzes when your heart rate hits the limits.
|
|
|
|
This app is for the [Bangle.js watch](https://banglejs.com/). While active it monitors your heart rate
|
|
and will notify you with a buzz whenever your heart rate falls below or jumps above the set limits.
|
|
|
|
# How it works
|
|
[Try it out](https://www.espruino.com/ide/emulator.html?codeurl=https://raw.githubusercontent.com/msdeibel/BangleApps/master/apps/wohrm/app.js&upload) using the [online Espruino emulator](https://www.espruino.com/ide/emulator.html).
|
|
|
|
## Setting the limits
|
|
|
|
Use the settings menu to set the limits. On the Bangle.js1 these can in addition be set with the buttons:
|
|
|
|
For setting the lower limit press button 4 (left part of the watch's touch screen).
|
|
Then adjust the value with the buttons 1 (top) and 3 (bottom) of the watch.
|
|
|
|
For setting the upper limit act accordingly after pressing button 5 (the right part of the watch's screen).
|
|
|
|
## Reading Reliability
|
|
As per the specs of the watch the HR monitor is not 100% reliable all the time.
|
|
That's why the WOHRM displays a confidence value for each reading of the current heart rate.
|
|
|
|
To the left and right of the "Current" value two colored bars indicate the confidence in
|
|
the received value: For 85% and above the bars are green, between 84% and 50% the bars are yellow
|
|
and below 50% they turn red.
|
|
|
|
## Closing the app
|
|
Pressing middle button will switch off the HRM of the watch and return you to the launcher.
|
|
|
|
# HRM usage
|
|
The HRM is switched on when the app is started. It stays switch on while the app is running, even
|
|
when the watch screen goes to stand-by.
|
|
|
|
|
|
Screenshot BJS2 emul
|
|
|
|
|
|
|